F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

36
info-center synchronous
Use info-center synchronous to enable synchronous information output.
Use undo info-center synchronous to disable synchronous information output.
Syntax
info-center synchronous
undo info-center synchronous
Default
Synchronous information output is disabled.
Views
System view
Default command level
2: System level
Usage guidelines
If system information is output before you enter information at a command line prompt, the system does
not display the command line prompt after the system information output.
If system information is output when you are entering some interactive information (non Y/N confirmation
information), the system displays your input in a new line after the system information output.
Examples
# Enable synchronous information output, and then execute the display current-configuration command
to view the current configuration of the device.
<Sysname> system-view
[Sysname] info-center synchronous
% Info-center synchronous output is on
[Sysname] display current-
At this time, the system receives log information. It displays the log information first, and then displays
your previous input, which is display current- in this example.
%May 21 14:33:19:425 2012 Sysname SHELL/4/LOGIN: VTY login from 192.168.1.44
[Sysname] display current-
Enter configuration to complete the display current-configuration command, and press the Enter key to
execute the command.
# Enable synchronous information output, and then save the current configuration (enter interactive
information).
<Sysname> system-view
[Sysname] info-center synchronous
% Info-center synchronous output is on
[Sysname] save
The current configuration will be written to the device. Are you sure? [Y/N]:
At this time, the system receives the log information. It displays the log information first and then displays
[Y/N].
%May 21 14:33:19:425 2012 Sysname SHELL/4/LOGIN: VTY login from 192.168.1.44
[Y/N]: