F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

37
Enter Y or N to complete your input.
info-center syslog channel
Use info-center syslog channel to configure the Web output channel. The system uses this channel to
output information to the Web interface.
Use undo info-center syslog channel to restore the default.
Syntax
info-center syslog channel { channel-number | channel-name }
undo info-center syslog channel
Default
The Web output channel is channel 6.
Views
System view
Default command level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about configuring a channel name, see info-center channel name.
Examples
# Output system information to the Web interface through channel 7.
<Sysname> system-view
[Sysname] info-center syslog channel 7
info-center timestamp
Use info-center timestamp to configure the timestamp format for system information sent to all
destinations except the log host.
Use undo info-center timestamp to restore the default.
Syntax
info-center timestamp { debugging | log | trap } { boot | date | none }
undo info-center timestamp { debugging | log | trap }
Default
The timestamp format for system information is date.
Views
System view
Default command level
2: System level