F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

42
The system clears the security log file buffer after saving security logs into the security log file
automatically or manually.
A local user can use this command only after being authorized as the security log administrator by the
system administrator through the authorization-attribute user-role security-audit command. For more
information about the authorization-attribute command, see Security Command Reference.
Examples
# Save the logs in the security log file buffer into the security log file.
<Sysname> security-logfile save
terminal debugging
Use terminal debugging to enable the display of debug information on the current terminal.
Use undo terminal debugging to disable the display of debug information on the current terminal.
Syntax
terminal debugging
undo terminal debugging
Default
The display of debug information is disabled both on the console and the current terminal.
Views
User view
Default command level
1: Monitor level
Usage guidelines
To view debug information, execute the terminal monitor and terminal debugging commands, enable
the information center (enabled by default), and use a debugging command to enable the related
debugging.
The configuration of this command is only valid for the current connection between the terminal and the
device. If a new connection is established, the default is restored.
Examples
# Enable the display of debug information on the current terminal.
<Sysname> terminal debugging
Info: Current terminal debugging is on.
terminal logging
Use terminal logging to enable the display of log information on the current terminal.
Use undo terminal logging to disable the display of log information on the current terminal.
Syntax
terminal logging
undo terminal logging