F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

46
Field Descri
p
tion
No userlog export is enabled
User logs are not sent to the log server. It may be because exporting
user logs to the log server is not configured, or user logs are sent to
the information center.
Export Version 1 logs to log server Export user log packets of version 1.0 to the log server.
Source address of exported logs
Source IP address of the user log packets (this field will not be
displayed if the source IP address is not configured).
Address of log server IP address and port number of the log server.
VPN-instance
VPN instance name of the VPN to which the log server belongs
(VPN instance name can be specified only when the log server is
specified by an IPv4 address).
Total logs/UDP packets exported
Total number of user logs exported and total number of UDP
packets carrying these user logs (a UDP packet may carry multiple
user logs).
Logs in buffer Total number of user logs in the buffer.
Related commands
reset userlog flow export
reset userlog flow export
Use reset userlog flow export to clear user log statistics.
Syntax
reset userlog flow export
Views
User view
Default command level
2: System level
Parameters
None
Examples
# Clear user log statistics.
<Sysname> reset userlog flow export
Related commands
display userlog export
reset userlog flow logbuffer
Use reset userlog flow logbuffer to clear user logs in the log buffer.
Syntax
reset userlog flow logbuffer