F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

54
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no group is specified, the command displays information about all SNMP groups.
Examples
# Display information about all SNMP groups.
<Sysname> display snmp-agent group
Group name: groupv1
Security model: v1 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview: <no specified>
Storage-type: nonVolatile
Group name: groupv3
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview: <no specified>
Storage-type: nonVolatile
Table 14 Command output
Field Descri
p
tion
Group name SNMP group name.
Security model
Security model of the SNMP group:
• authPriv—Authentication with privacy.
• authNoPriv—Authentication without privacy.
• noAuthNoPriv—No authentication, no privacy.
The security model of an SNMPv1 or SNMPv2c group can only be noAuthNoPriv.
Readview Read only MIB view accessible to the SNMP group.
Writeview Write MIB view accessible to the SNMP group.
Notifyview
Notify MIB view for the SNMP group. The SNMP users in the group can send traps only for
the nodes in the notify MIB view.
Storage-type
Storage type, including volatile, nonVolatile, permanent, readOnly, and other (see Table
13).
Related commands
snmp-agent group
display snmp-agent local-engineid
Use display snmp-agent local-engineid to display the local SNMP engine ID.