F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

72
• Location—Null
• Version—SNMPv3.
Views
System view
Default command level
3: Manage level
Parameters
contact sys-contact: Specifies the system contact, a string of 1 to 200 characters.
location sys-location: Specifies the system location, a string of 1 to 200 characters.
version: Specifies SNMP versions.
• all: Specifies SNMPv1, SNMPv2c, and SNMPv3.
• v1: Specifies SNMPv1.
• v2c: Specifies SNMPv2c.
• v3: Specifies SNMPv3.
Usage guidelines
Configure the SNMP agent with the same SNMP version as the NMS for successful communications
between them.
Examples
# Configure the system contact as Dial System Operator at beeper # 27345.
<Sysname> system-view
[Sysname] snmp-agent sys-info contact Dial System Operator at beeper # 27345
snmp-agent target-host
Related commands
display snmp-agent sys-info
snmp-agent target-host
Use snmp-agent target-host to configure a target host for receiving traps sent by the SNMP agent.
Use undo snmp-agent target-host to remove settings for an SNMP trap target host.
Syntax
snmp-agent target-host trap address udp-domain ip-address [ udp-port port-number ] [ vpn-instance
vpn-instance-name ] params securityname security-string [ v1 | v2c | v3 [ authentication | privacy ] ]
undo snmp-agent target-host trap address udp-domain ip-address params securityname security-string
[ vpn-instance vpn-instance-name ]
Views
System view
Default command level
3: Manage level