F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

80
{ v1 | v2c } command. To display the SNMPv1 and SNMPv2c communities created in this way, use the
display snmp-agent community command.
The snmp-agent usm-user { v1 | v2c } command enables managing SNMPv1 and SNMPv2c users in the
same way as managing SNMPv3 users. It does not affect the way of configuring SNMPv1 and
SNMPv2c communities on the NMS.
Examples
# Add the user userv2c to the SNMPv2c group readCom so an NMS can use the protocol SNMPv2c and
the read-only community name userv2c to access the SNMP agent.
<Sysname> system-view
[Sysname] snmp-agent sys-info version v2c
[Sysname] snmp-agent group v2c readCom
[Sysname] snmp-agent usm-user v2c userv2c readCom
# Add the user userv2c in the SNMPv2c group readCom so only the NMS at 1.1.1.1 can use the protocol
SNMPv2c and read-only community name userv2c to access the SNMP agent.
<Sysname> system-view
[Sysname] acl number 2001
[Sysname-acl-basic-2001] rule permit source 1.1.1.1 0.0.0.0
[Sysname-acl-basic-2001] rule deny source any
[Sysname-acl-basic-2001] quit
[Sysname] snmp-agent sys-info version v2c
[Sysname] snmp-agent group v2c readCom
[Sysname] snmp-agent usm-user v2c userv2c readCom acl 2001
Related commands
• display snmp-agent community
• snmp-agent group
snmp-agent usm-user v3
Use snmp-agent usm-user v3 to add an SNMPv3 user to an SNMP group.
Use undo snmp-agent usm-user v3 to delete an SNMPv3 user from an SNMP group.
Syntax
snmp-agent usm-user v3 user-name group-name [ cipher ] [ authentication-mode { md5 | sha }
auth-password [ privacy-mode { 3des | aes128 | des56 } priv-password ] ] [ acl acl-number | acl ipv6
ipv6-acl-number ] *
undo snmp-agent usm-user v3 user-name group-name { local | engineid engineid-string }
Views
System view
Default command level
3: Manage level
Parameters
user-name: Specifies a username, a case-sensitive string of 1 to 32 characters.
group-name: Specifies a group name, a case-sensitive string of 1 to 32 characters.