F3215-HP Load Balancing Module System Maintenance Command Reference-6PW101

89
Field Descri
p
tion
dropevents
Dropped packets during the sampling period, corresponding to the MIB node
etherHistoryDropEvents.
octets
Number of octets received during the sampling period, corresponding to the
MIB node etherHistoryOctets.
packets
Number of packets received during the sampling period, corresponding to the
MIB node etherHistoryPkts.
broadcastpackets
Number of broadcasts received during the sampling period, corresponding to
the MIB node etherHistoryBroadcastPkts.
multicastpackets
Number of multicasts received during the sampling period, corresponding to the
MIB node etherHistoryMulticastPkts.
CRC alignment errors
Number of packets received with CRC alignment errors during the sampling
period, corresponding to the MIB node etherHistoryCRCAlignErrors.
undersize packets
Number of undersize packets received during the sampling period,
corresponding to the MIB node etherHistoryUndersizePkts.
oversize packets
Number of oversize packets received during the sampling period,
corresponding to the MIB node etherHistoryOversizePkts.
fragments
Number of fragments received during the sampling period, corresponding to the
MIB node etherHistoryFragments.
jabbers
Number of jabbers received during the sampling period, corresponding to the
MIB node etherHistoryJabbers.
collisions
Number of colliding packets received during the sampling period,
corresponding to the MIB node etherHistoryCollisions.
utilization
Bandwidth utilization during the sampling period, corresponding to the MIB
node etherHistoryUtilization.
Related commands
rmon history
display rmon prialarm
Use display rmon prialarm to display the configuration of the specified or all private alarm entries.
Syntax
display rmon prialarm [ entry-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
entry-number: Specifies a private alarm entry index in the range of 1 to 65535. If no entry is specified,
the command displays the configuration of all private alarm entries.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.