F3215-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

94
IMPORTANT:
To avoid TFTP connection failures, when you specify a source interface for TFTP packets, make sure the
interface has been assigned a primary IP address.
To use the device as a TFTP client:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Use an ACL to control the
client's access to TFTP servers.
tftp-server [ ipv6 ] acl acl-number
Optional.
By default, no ACL is used for
access control.
3. Specify a source IP address
for outgoing TFTP packets.
tftp client source { interface
interface-type interface-number | ip
source-ip-address }
Optional.
By default, the primary IP
address of the output interface is
used as the source IP address.
4. Return to user view. quit N/A
5. Download or upload a file.
• For IPv4:
tftp server-address { get | put |
sget } source-filename
[ destination-filename ]
[ vpn-instance
vpn-instance-name ] [ source
{ interface interface-type
interface-number | ip
source-ip-address } ]
• For IPv6:
tftp ipv6 tftp-ipv6-server [ -i
interface-type interface-number ]
{ get | put } source-filename
[ destination-filename ]
[ vpn-instance
vpn-instance-name ]
Optional.
Displaying and maintaining the TFTP client
Task Command Remarks
Display the source IP address configuration
of the TFTP client.
display tftp client configuration [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
TFTP client configuration example
Network requirements
Configure the PC in Figure 36 as a TFTP server, and use TFTP to download the system software image file
newest.bin from the PC to LB and upload the configuration file config.cfg from LB to the PC for backup.