F3215-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

10
Severity
Severity
value
Description
Corresponding
keyword in
commands
Alert 1
Action must be taken immediately to solve a serious
problem. For example, traffic on an interface exceeds the
upper limit.
alerts
Critical 2
Critical condition. For example, the device temperature
exceeds the upper limit, the power module fails or the fan
tray fails.
critical
Error 3
Error condition. For example, the link state changes or a
storage card is unplugged.
errors
Warning 4
Warning condition. For example, an interface is
disconnected, or the memory resources are used up.
warnings
Notification 5
Normal but significant condition. For example, a terminal
logs in to the device, or the device reboots.
notifications
Informational 6
Informational message. For example, a command or a
ping operation is executed.
informational
Debug 7 Debug message. debugging
Output channels and destinations
Table 2 shows the output channels and destinations.
The system supports ten channels. By default, channels 0 through 6, and channel 9 are configured with
channel names and output destinations. You can change these default settings as needed. You can also
configure channels 7 and 8 and associate them with specific output destinations as needed.
You can use the info-center channel name command to change the name of an information channel.
Each output destination receives information from only one information channel, but each information
channel can output information to multiple output destinations.
Table 2 Default information channels and output destinations
Channel
number
Default
channel name
Default output destination
System information received by
default
0 console Console Log, trap and debug information
1 monitor Monitor terminal Log, trap and debug information
2 loghost Log host Log, trap and debug information
3 trapbuffer Trap buffer Trap information
4 logbuffer Log buffer Log information
5 snmpagent SNMP module Trap information
6 channel6 Web interface Log information
7 channel7 Not specified Log, trap, and debug information
8 channel8 Not specified Log, trap, and debug information
9 channel9 Log file Log, trap, and debug information