F3215-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

25
Task Command Remarks
(Optional.) Upload the
security log file to the SFTP
server.
• Establish a connection to an IPv4
SFTP server and enter SFTP client
view:
sftp server [ port-number ]
[ vpn-instance vpn-instance-name ]
[ prefer-compress { zlib |
zlib-openssh } | prefer-ctos-cipher
{ 3des | aes128 | des } |
prefer-ctos-hmac { md5 | md5-96
| sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1
| dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | des } |
prefer-stoc-hmac { md5 | md5-96
| sha1 | sha1-96 } ] *
• Establish a connection to an IPv6
SFTP server and enter SFTP client
view:
sftp ipv6 server [ port-number ]
[ vpn-instance vpn-instance-name ]
[ prefer-compress { zlib |
zlib-openssh } | prefer-ctos-cipher
{ 3des | aes128 | des } |
prefer-ctos-hmac { md5 | md5-96
| sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1
| dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | des } |
prefer-stoc-hmac { md5 | md5-96
| sha1 | sha1-96 } ] *
• Upload a file on the client to the
remote SFTP server:
put localfile [ remotefile ]
• Download a file from a remote SFTP
server and save it:
get remotefile [ localfile ]
Optional.
The sftp and sftp ipv6 commands
are available in user view. The other
commands are available in SFTP
client view.
For more information about these
commands, see Security Command
Reference.
For all other operations supported
by the device acting as an SFTP
client, see Security Configuration
Guide.
Enabling synchronous information output
The output of system logs interrupts ongoing configuration operations. You have to find the previously
input commands before the logs. Synchronous information output can show the previous input after log
output and a command prompt in command editing mode, or a [Y/N] string in interaction mode so you
can continue your operation from where you were stopped.
If system information, such as log information, is output before you input any information under the
current command line prompt, the system does not display the command line prompt after the system
information output.
If system information is output when you are inputting some interactive information (non Y/N
confirmation information), the system displays your previous input in a new line but does not display the
command line prompt.
To enable synchronous information output: