F3215-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

37
Field Descri
p
tion
Prot Protocol.
Operator Indicates the reason why the flow ended.
Reserved For future applications.
Table 9 Packet format in user logging version 3.0
Field Descri
p
tion
Prot Protocol.
Operator Indicates the reason why the flow ended.
IpVersion IP packet version.
TosIPv4 ToS field of the IPv4 packet.
SourceIP Source IP address.
SrcNatIP Source IP address after Network Address Translation (NAT).
DestIP Destination IP address.
DestNatIP Destination IP address after NAT.
SrcPort TCP/UDP source port number.
SrcNatPort TCP/UDP source port number after NAT.
DestPort TCP/UDP destination port number.
DestNatPort TCP/UDP destination port number after NAT.
StartTime Start time of the flow, in seconds, counted from 1970/01/01 00:00.
EndTime End time of the flow, in seconds, counted from 1970/01/01 00:00.
InTotalPkg Number of packets received.
InTotalByte Number of bytes received.
OutTotalPkg Number of packets sent.
OutTotalByte Number of the bytes sent.
Reserved1
• Reserved in version 0x02.
• In version 0x03, the first byte is the source VPN ID, the second byte is the destination
VPN ID, and the third and forth bytes are reserved.
Reserved2 For future applications.
Reserved3 For future applications.
Configuring user logging in the Web interface
To configure user logging:
1. Select Log Report > Userlog from the navigation tree to enter the page as shown in Figure 11.