F3215-HP Load Balancing Module System Maintenance Configuration Guide-6PW101

46
Figure 16 Global configuration page
2. Configure session logging thresholds as described in Table 12.
3. Click Apply.
Table 12 Configuration items
Item Descri
p
tion
Time Threshold
Set the time threshold for outputting session logging entries.
With this argument set, log entries will be output for sessions whose lifetimes
reach the specified time threshold.
Traffic Threshold
Set the traffic threshold for outputting session logging entries. It can be in
number of packets or bytes.
With the traffic threshold set, log entries will be output for sessions whose
traffic reaches the specified threshold in number of bytes or packets.
Log report
The log report module allows you to view the following types of log information on the device:
• System logs.
• Connection limit logs.
• Attack prevention logs.
• Blacklist logs.
• User logs.
Except that the user logs can be viewed at both the Web interface and the CLI, all other types of log
information can only be viewed in the Web interface.
Displaying system logs
Select Log Report > Report > System Log from the navigation tree to enter the page as shown in Figure
17. Table 13 des
cribes the configuration items.