F3215-HP Load Balancing Module System Management Command Reference-6PW101

94
Parameters
max-entries: Specifies the maximum number of sessions that can be set up on a non-default VD, in the
range of 0 to 2200000.
Usage guidelines
Use this command to put a limit on the maximum of sessions that can be set up on a non-default VD. The
actual number of sessions available for a non-default VD, however, is also restricted by the number of
sessions available on the physical device.
The maximum of sessions that can be set up on the default VD equals the maximum number of sessions
supported by the physical device.
Examples
# Set the maximum number of sessions to 5000 for VD test.
<Sysname> system-view
[Sysname] vd test id 2
[Sysname-vd-test] limit-resource session max-entries 5000
Related commands
vd
session max-entries
Use session max-entries to set the maximum number of concurrent sessions that can be set up on a VD.
Use undo session max-entries to restore the default.
Syntax
session max-entries max-entries
undo session max-entries
Default
The maximum number of concurrent sessions for the default VD equals the maximum number of sessions
supported by the physical device, and the maximum number of concurrent sessions for a non-default VD
equals the maximum number of sessions specified for the VD by using the limit-resource session
max-entries command.
Views
System view, VD system view
Default command level
2: System level
Parameters
max-entries: Specifies the maximum number of concurrent sessions that can be set up on a VD.
Usage guidelines
To set the maximum number of concurrent sessions for the default VD, use this command in system view.
To set the maximum number of concurrent sessions for a non-default VD, log in to the VD and use this
command in VD system view.
The maximum number of concurrent sessions for a VD cannot exceed the maximum number of sessions
specified for the VD.