F3215-HP Load Balancing Module System Management Command Reference-6PW101

96
Syntax
vd vd-name [ id vd-id ]
undo vd vd-name [ id vd-id ]
Default
There is a default VD with the name Root and the ID 1.
Views
System view
Default command level
2: System level
Parameters
vd-name: Specifies the VD name, a case-insensitive string of 1 to 20 characters that contains no question
mark (?), less-than sign (<), greater-than sign (>), backward slash (\), quotation mark ("), percentage
sign (%), apostrophe ('), ampersand (&), or number sign (#).
vd-id: Specifies the VD ID, in the range of 1 to 64.
Usage guidelines
You cannot delete the default VD, or change its name or ID.
When creating a VD on a device, you must specify a VD name and a VD ID that are respectively unique
on the device. To enter the view of an existing VD, you can specify the VD name, or specify both the VD
name and the VD ID. If you specify both the VD name and the VD ID, make sure the two arguments
identify the same VD.
Examples
# Create a VD with the name test and the ID 2, and enter VD view.
<Sysname> system-view
[Sysname] vd test id 2
[Sysname-vd-test]