F3215-HP Load Balancing Module System Management Command Reference-6PW101

98
NTP configuration commands
display ntp-service sessions
Use display ntp-service sessions to display information about all NTP sessions.
Syntax
display ntp-service sessions [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
verbose: Displays detailed information about all NTP sessions. If you do not specify this keyword, the
command displays only brief information about the NTP sessions.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display brief information about all NTP sessions.
<Sysname> display ntp-service sessions
source reference stra reach poll now offset delay disper
********************************************************************************
[12345]127.127.1.0 127.127.1.0 3 1 64 33 0.0 0.0 0.0
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured
Total associations : 1
Table 20 Command output
Field Descri
p
tion
source IP address of the clock source.
reference
Reference clock ID of the clock source:
• If the reference clock is the local clock, the value of this field is related to the value of
the stra field:
{ When the value of the stra field is 0 or 1, this field will be LOCL.
{ When the stra field has another value, this field will be the IP address of the local
clock.
• If the reference clock is the clock of another device on the network, the value of this field
will be the IP address of that device.