F3215-HP Load Balancing Module System Management Command Reference-6PW101

6
undo databits
Default
Eight data bits are used for each character.
Views
User interface view
Default command level
2: System level
Parameters
5: Uses five data bits for each character.
6: Uses six data bits for each character.
7: Uses seven data bits for each character.
8: Uses eight data bits for each character.
Usage guidelines
This command is only applicable to asynchronous serial interfaces, including AUX and console ports.
This setting must be the same as that on the configuration terminal.
Examples
# Configure AUX 0 to use 5 data bits for each character.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] databits 5
display ip http
Use display ip http to display HTTP information.
Syntax
display ip http [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.