F3215-HP Load Balancing Module System Management Command Reference-6PW101

135
Usage guidelines
The device is shipped with some basic settings called "factory defaults." These default settings make sure
the device can start up and run normally when it has no configuration file or the configuration file is
corrupted.
Examples
# Display the factory defaults.
<Sysname> display default-configuration
Related commands
• display current-configuration
• display saved-configuration
display saved-configuration
Use display saved-configuration to display the contents of the configuration file to be used at the next
startup.
Syntax
display saved-configuration [ by-linenum ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
by-linenum: Identifies each line of displayed information with a line number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Use this command to verify that important settings have been saved to the next-startup configuration file.
If no next-startup configuration file has been specified, or the specified next-startup configuration does
not exist, this command displays the error message "The config file does not exist!"
Examples
# Display the next-startup configuration file.
<HP> display saved-configuration
#
version 5.20, Test 5310
#
sysname HP
#