F3215-HP Load Balancing Module System Management Command Reference-6PW101

9
Syntax
display user-interface [ num1 | { aux | console | vty } num2 ] [ summary ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
num1: Specifies the absolute number of a user interface. The value range typically starts from 0.
aux: Specifies the AUX user interface.
console: Specifies the console user interface.
vty: Specifies the VTY user interface.
num2: Specifies the relative number of a user interface.
summary: Displays summary information about user interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about user interface 0.
<Sysname> display user-interface 0
Idx Type Tx/Rx Modem Privi Auth Int
+ 0 CON 0 9600 - 3 N -
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
A : Authentication use AAA.
L : Authentication use local database.
N : Current UI need not authentication.
P : Authentication use current UI's password.
Table 3 Command output
Field Descri
p
tion
Idx Absolute number of the user interface.