F3215-HP Load Balancing Module System Management Command Reference-6PW101

10
Field Descri
p
tion
Type Type and relative number of the user interface.
Tx/Rx Transmit/receive rate of the user interface.
Modem
Whether the modem is allowed to dial in (in), dial out (out), or both (inout).
If modem dial-in is disabled, a hyphen (-) is displayed.
Privi Command level of a user under that user interface.
Auth
Authentication mode for the users:
• A—Scheme authentication mode.
• L—Local authentication mode (not supported).
• N—None authentication mode.
• P—Password authentication mode.
Int Physical port that corresponds to the user interface.
# Display summary information about all user interfaces.
<Sysname> display user-interface summary
User interface type : [CON]
0:X
User interface type : [AUX]
81:X
User interface type : [VTY]
82:XUXU U
3 character mode users. (U)
83 UI never used. (X)
3 total UI in use
Table 4 Command output
Field Descri
p
tion
0:X
0 represents the absolute number of the user interface. If the user interface is not used,
an X is displayed. If the user interface is in use, a U is displayed. For example, 9:UXXX
X shows that the absolute number of the first user interface is 9, and the user interface is
in use. User interfaces 10, 11, 12, and 13 are not in use.
display users
Use display users to display information about the user interfaces being used.
Use display users all to display information about all user interfaces supported by the device.
Syntax
display users [ all ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level