F3215-HP Load Balancing Module System Management Command Reference-6PW101

22
Views
User view
Default command level
3: Manage level
Usage guidelines
When you must leave the device for a while, use this command to lock the current user interface to
prevent unauthorized access.
After you enter this command, you are asked to enter a password (up to 16 characters) and then confirm
it by entering the password again.
To unlock the user interface, press Enter and enter the correct password.
Examples
# Lock the current user interface and then unlock it.
<Sysname> lock
Please input password<1 to 16> to lock current user terminal interface:
Password:
Again:
locked !
Password:
<Sysname>
parity
Use parity to specify a parity check mode.
Use undo parity to restore the default.
Syntax
parity { even | mark | none | odd | space }
undo parity
Default
The setting is none, and no parity check is performed.
Views
User interface view