F3215-HP Load Balancing Module System Management Command Reference-6PW101

33
Default
The command level is 3 for the console user interface and 0 for other user interfaces.
Views
User interface view
Default command level
3: Manage level
Parameters
level: Specifies a user privilege level, which ranges from 0 to 3.
Usage guidelines
User privilege levels include visit, monitor, system, and manage, represented by the number 0, 1, 2 and
3 respectively. You can change the user privilege level when necessary.
Examples
# Set the command level for users logging in through VTY 0 to 0.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] user privilege level 0
After you Telnet to the device through VTY 0, the terminal only displays commands of level 0 in the help
information:
<Sysname> ?
User view commands:
cluster Run cluster command
display Display current system information
ping Ping function
quit Exit from current command view
rsh Establish one RSH connection
ssh2 Establish a secure shell client connection
super Set the current user priority level
telnet Establish one TELNET connection
tracert Trace route function
user-interface
Use user-interface to enter user interface view.
Syntax
user-interface { first-num1 [ last-num1 ] | { aux | console | vty } first-num2 [ last-num2 ] }
Views
System view
Default command level
2: System level
Parameters
first-num1: Specifies the absolute number of the first user interface. The value range and typically starts
from 0.