F3215-HP Load Balancing Module System Management Command Reference-6PW101

After you configure a fixed verification code for Web login, a Web user can use the code for login,

without caring about the verification code displayed on the login page. This feature is intended for test

environments where a script is usually used for Web function tests. Eliminating the requirement for

entering the verification code every time, this feature helps improve the test efficiency.

For Web access security, do not use this feature in production environments.

This command is not saved to the configuration file and cannot survive a reboot.

Examples

# Specify a fixed verification code for Web login

<Sysname> web captcha test

web https-authorization mode

Use web https-authorization mode to specify the authentication mode for users trying to log in to the

device through HTTPS.

Use undo web https-authorization mode to restore the default.

Syntax

web https-authorization mode { auto | manual }

undo web https-authorization mode

Default

A user must enter correct username and password to log in through HTTPS.

Views

System view

Default command level

2: System level

Parameters

auto: Uses the PKI certificates of HTTPS users to automatically authenticate them.

manual: Provides a login page for HTTPS users to enter the correct username and password.

Usage guidelines

When the auto mode is enabled:

• If the PKI certificate of the user is correct and not expired, the CN field in the certificate is used as

the username to perform AAA authentication. If the authentication succeeds, the user automatically

enters the Web interface of the device.

• If the PKI certificate of the user is correct and not expired, but the AAA authentication fails, the

device shows the Web login page. The user can log in to the device after entering correct username

and password.

• When the PKI certificate of the user is incorrect or expired, the HTTPS connection is terminated.

Examples

# Specify the auto authentication mode for users trying to log in to the device through HTTPS.

<Sysname> system-view

[Sysname] web https-authorization mode auto