F3215-HP Load Balancing Module System Management Command Reference-6PW101

39
Syntax
In standalone mode:
oap management-ip ip-address slot slot-number
undo oap management-ip slot slot-number
In IRF mode:
oap management-ip ip-address chassis chassis-number slot slot-number
undo oap management-ip slot chassis chassis-number slot slot-number
Default
The management IP address of an OAP module is not configured.
Views
System view
Default command level
2: System level
Parameters
slot slot-number: Specifies the number of the slot where an OAP system resides. (In standalone mode.)
ip-address: Management IP address of the OAP module. This address must be configured on the OAP
module.
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. (In IRF mode.)
Usage guidelines
Support for this command varies by the device model and software release of the network device that
holds the LB module.
To use NMS to manage an OAP module, you must first configure the management IP address of the OAP
module.
Examples
# Configure the management IP address of the OAP module in slot 3 as 1.1.1.1 in standalone mode.
<Sysname> System-view
[Sysname] oap management-ip 1.1.1.1 slot 3
# Configure the management IP address of the OAP module in slot 5 of the device with the member ID
o f 2 a s 1.1.1.1 i n I R F m o d e .
<Sysname> System-view
[Sysname] oap management-ip 1.1.1.1 chassis 2 slot 5
oap reboot
Use oap reboot to reset the OAP module.
Syntax
In standalone mode:
oap reboot slot slot-number
In IRF mode: