F3215-HP Load Balancing Module System Management Command Reference-6PW101

40
oap reboot chassis chassis-number slot slot-number
Views
User view
Default command level
3: Manage level
Parameters
slot slot-number: Specifies the number of the slot where an OAP system resides. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. (In IRF mode.)
Examples
# Reset the OAP module in slot 3 in standalone mode.
<Sysname> oap reboot slot 3
This command will recover the OAP from shutdown or other failed state.
Warning: This command may lose the data on the hard disk if the OAP is not being shut down!
Continue? [Y/N]:y
Reboot OAP by command.
# Reset the OAP module in slot 5 of the device with the member ID of 2 in IRF mode.
<Sysname> oap reboot chassis 2 slot 5
This command will recover the OAP from shutdown or other failed state.
Warning: This command may lose the data on the hard disk if the OAP is not being shut down!
Continue? [Y/N]:y
Reboot OAP by command.