F3215-HP Load Balancing Module System Management Command Reference-6PW101

46
Status: Open
MAC Address: 3822-d628-f340
Interface: Ten-GigabitEthernet4/0/1
Last registered: 09/20/2012 16:45:24
Table 9 Command output
Field Descri
p
tion
Client ID ID of the ACSEI client.
Status ACSEI client status.
MAC Address MAC address of the ACSEI client.
Interface Interface carrying the ACSEI client.
Last registered Last registration time of the ACSEI client.
ACSEI client configuration commands (on LB
module)
acsei-client enable
Use acsei-client enable to enable the ACSEI client function.
Use undo acsei-client enable to disable the ACSEI client function.
Syntax
acsei-client enable
undo acsei-client enable
Default
The ACSEI client function is disabled.
Views
Interface view
Default command level
2: System level
Usage guidelines
The ACSEI client is integrated in the Comware software system of the LB module as a function. It can be
started only on one interface of the LB module at a time. However, the ACSEI client on the LB module and
that on the device can run simultaneously.
Examples
# Enable ACSEI client on interface Ten-GigabitEthernet 0/0.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 0/0
[Sysname-Ten-GigabitEthernet0/0] acsei-client enable