F3215-HP Load Balancing Module System Management Command Reference-6PW101

51
Syntax
clock summer-time zone-name repeating start-time start-date end-time end-date add-time
undo clock summer-time
Default
Daylight saving time is disabled and UTC time zone applies.
Views
System view
Default command level
3: Manage level
Parameters
zone-name: Specifies a daylight saving time schedule by a zone name, a case-sensitive string of 1 to 32
characters.
start-time: Specifies a start time, in the hh:mm:ss format. Zeros can be omitted, unless you specify
00:00:00.
start-date: Specifies a start date, which can be set in the following ways:
• Enter the year, month and date at one time, in the MM/DD/YYYY or YYYY/MM/DD format.
• Enter the year, month and date one by one, separated by spaces. The year ranges from 2000 to
2035; the month can be January, February, March, April, May, June, July, August, September,
October, November or December; the start week can be the first, second, third, fourth, fifth or last
week of the month; the start date is Sunday, Monday, Tuesday, Wednesday, Thursday, Friday,
Saturday.
end-time: Specifies an end time, in the hh:mm:ss format. Zeros can be omitted, unless you specify
00:00:00.
end-date: Specifies an end date, which can be set in the following ways:
• Enter the year, month and date at one time, in the MM/DD/YYYY or YYYY/MM/DD format.
• Enter the year, month and date one by one, separated by spaces. The year ranges from 2000 to
2035; the month can be January, February, March, April, Ma
y, June, July, August, September,
October, November or December; the end week can be the first, second, third, fourth, fifth or last
week of the month; the end date is Sunday, Monday, Tuesday, Wednesday, Thursday, Friday,
Saturday.
add-time: Specifies a time to be added to the standard time of the device, in the hh:mm:ss format. Zeros
can be omitted, unless you specify 00:00:00.
Usage guidelines
The interval between start-time start-date and end-time end-date must be longer than one day and shorter
than one year. If the current system time is in the specified daylight saving days, the add-time value
automatically adds to the system time.
To verify the setting, use the display clock command.
The timestamps in system messages are adjusted in reference to the time zone and daylight saving
schedule.