F3215-HP Load Balancing Module System Management Command Reference-6PW101

Related commands

• clock datetime

• clock summer-time one-off

• clock summer-time repeating

• display clock

configure-user count

Use configure-user count to configure the maximum number of users allowed to enter system view at the

same time.

Use undo configure-user count to restore the default.

Syntax

configure-user count number

undo configure-user count

Views

System view

Default command level

2: System level

Parameters

number: Specifies the maximum number of concurrent users. The value ranges from 1 to 55.

Usage guidelines

Two users are allowed to enter system view by default.

When multiple users enter system view to configure a certain attribute, the most recent configuration

applies.

When the number of users has already reached the upper limit, other users cannot enter system view.

Examples

# Configure to allow up to four users to enter system view concurrently.

<Sysname> system-view

[Sysname] configure-user count 4

Related commands

display configure-user

Use copyright-info enable to enable displaying the copyright statement.

Use undo copyright-info enable to disable displaying the copyright statement.

Syntax