F3215-HP Load Balancing Module System Management Command Reference-6PW101

59
Field Descri
p
tion
1% in last 5 seconds
After a boot, the system calculates and records the average CPU usage rate
every five seconds.
This field displays the average CPU usage rate in the last five seconds.
1% in last 1 minute
After a boot, the system calculates and records the average CPU usage rate
every one minute.
This field displays the average CPU usage rate in the last minute.
1% in last 5 minutes
After a boot, the system calculates and records the average CPU usage rate
every five minutes.
This field displays the average CPU usage rate in the last five minutes.
CPU usage info (no: idx:)
Information of CPU usage rate records:
• no—(no+1)th record. The "no" starts with 0, a smaller number means a
newer record.
• idx—Index of the current record in the history record table.
If you specify to display the current CPU usage statistics, (no: idx:) is not
displayed.
CPU Usage Stat. Cycle
CPU usage rate measurement interval, in seconds. For example, if the value is
41, it indicates that the average CPU usage rate during the last 41 seconds is
calculated. The value range of this field is 1 to 60.
CPU Usage Average CPU usage rate in a measurement interval, in percentage.
CPU Usage Stat. Time
CPU usage rate statistics time in seconds, that is, the system time when the
command is executed.
CPU Usage Stat. Tick
System runtime in ticks, represented by a 64-bit hexadecimal. CPU Tick High
represents the most significant 32 bits and the CPU Tick Low the least
significant 32 bits.
Actual Stat. Cycle
Actual CPU usage rate measurement interval in ticks, represented by a 64-bit
hexadecimal. CPU Tick High represents the most significant 32 bits and the
CPU Tick Low the least significant 32 bits. Owing to the precision of less than
one second, the actual measurement periods of different CPU usage rate
records might differ slightly.
display cpu-usage history
Use display cpu-usage history to display historical CPU usage statistics in charts.
Syntax
display cpu-usage history [ task task-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: M o n i t o r l e ve l
Parameters
task task-id: Displays the historical CPU usage statistics for the specified task, where task-id represents the
task number. If the task-id argument is not provided, this command displays the historical CPU usage