F3215-HP Load Balancing Module System Management Command Reference-6PW101

2
******************************************************************************
User interface con0 is available.
Please press ENTER.
3. Press Enter.
Pressing Enter does not start a session.
4. Enter s.
A terminal session is started.
<Sysname>
%Mar 2 18:40:27:981 2012 Sysname SHELL/5/LOGIN: Console login from con0
authentication-mode
Use authentication-mode to set the authentication mode for a user interface.
Use undo authentication-mode to restore the default.
Syntax
authentication-mode { none | password | scheme }
undo authentication-mode
Default
The authentication mode is scheme for VTY user interfaces, and none for the console and AUX user
interfaces.
Views
User interface view
Default command level
3: Manage level
Parameters
none: Performs no authentication.
password: Performs local password authentication.
scheme: Performs AAA authentication. For more information about AAA, see Security Configuration
Guide.
Examples
# Enable the none authentication mode for user interface VTY 0.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] authentication-mode none
# Enable password authentication for user interface VTY 0 and set the password to 321.
<Sysname> system-view
[Sysname] user-interface vty 0