F3215-HP Load Balancing Module System Management Command Reference-6PW101

75
Default command level
3: Manage level
Parameters
job-name: Specifies the name for a job, a string of 1 to 32 characters.
Usage guidelines
You can add commands in job view to execute at certain times.
You can use the job command to create multiple jobs.
Examples
# Create the job saveconfiguration or enter its view.
<Sysname> system-view
[Sysname] job saveconfiguration
[Sysname-job-saveconfiguration]
Related commands
• time
• view
reboot
Use reboot to reboot the device or the specified subcard.
Syntax
reboot
Views
User view
Default command level
3: Manage level
Usage guidelines
CAUTION:
• Device reboot can interrupt network services.
• If the main system software image file has been corrupted or does not exist, the device cannot reboot.
You must re-specify a main system software image file, or power off the device and then power it on so
the system can reboot with the backup system software image file.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
Examples
# Reboot the device.
<Sysname> reboot
The output is not shown.
reset unused porttag
Use reset unused porttag to clear unused 16-bit interface indexes.