F3215-HP Load Balancing Module System Management Command Reference-6PW101

79
Related commands
schedule reboot delay
schedule reboot delay
Use schedule reboot delay to schedule a device reboot to occur after a delay.
Use undo schedule reboot to disable the scheduled reboot function.
Syntax
schedule reboot delay { hh:mm | mm }
undo schedule reboot
Default
The scheduled reboot function is disabled.
Views
User view
Default command level
3: Manage level
Parameters
hh:mm: Specifies a delay for the device reboot, in the hh:mm format. The hh value ranges from 0 to 720,
and the mm value ranges from 0 to 59. When the hh value is 720, the mm value cannot be more than
0.
mm: Specifies a delay for the device reboot in minutes, which ranges from 0 to 43200.
Usage guidelines
CAUTION:
• Device reboot can interrupt network services.
• Changing any clock setting can cancel the reboot schedule.
The reboot delay cannot exceed 30 x 24 x 60 minutes, or 30 days.
The device supports only one device reboot schedule. If you configure the schedule reboot delay
command multiple times, the last configuration takes effect. The schedule reboot at command and the
schedule reboot delay command overwrite each other, and whichever is configured last takes effect.
The alert "REBOOT IN ONE MINUTE" appears one minute before the reboot time.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
Examples
# Schedule a device reboot in 88 minutes. This example assumes that the current time is 11: 48 o n J u n e
6, 2012.
<Sysname> schedule reboot delay 88
Reboot system at 13:16 06/06/2012(in 1 hour(s) and 28 minute(s)). confirm? [Y/N]:
Enter y at the prompt. If you have used the terminal logging command to enable the log display function
(enabled by default) on the terminal, the system automatically displays a reboot schedule log message.
<Sysname>