F3215-HP Load Balancing Module System Management Command Reference-6PW101

87
User management commands
acl (user interface view)
Use acl to reference ACLs to control access to the VTY user interface.
Use undo acl to cancel the ACL application.
Syntax
To use a basic or advanced ACL:
acl acl-number { inbound | outbound }
undo acl acl-number { inbound | outbound }
To use an Ethernet frame header ACL:
acl acl-number inbound
undo acl acl-number inbound
Default
Access to the VTY user interface is not restricted.
Views
VTY user interface view
Default command level
2: System level
Parameters
acl-number: Specifies the number of the ACL:
• Basic ACL—2000 to 2999
• Advanced ACL—3000 to 3999
• Ethernet frame header ACL—4000 to 4999
inbound: Restricts Telnet or SSH connections established in the inbound direction through the VTY user
interface. If the received packets for establishing a Telnet or SSH connection are permitted by an ACL rule,
the connection is allowed to be established. When the device functions as a Telnet server or SSH server,
use this keyword to control access of Telnet clients or SSH clients.
outbound: Restricts Telnet connections established in the outbound direction through the VTY user
interface. If the packets sent for establishing a Telnet connection are permitted by an ACL rule, the
connection is allowed to be established. When the device functions as a Telnet client, use this keyword
to define Telnet servers accessible to the client.
Usage guidelines
If no ACL is referenced in VTY user interface view, the VTY user interface has no access control over
establishing a Telnet or SSH connection.
If an ACL is referenced in VTY user interface view, the connection is permitted to be established only
when packets for establishing a Telnet or SSH connection match a permit statement in the ACL.