F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

99
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the unified
management VLAN.
unified-management vlan vlan-id
By default, no unified management
VLAN is configured.
The unified management VLAN is
used to forward management
packets among multiple systems.
3. Enter the view of the interface
connected to the device.
interface interface-type
interface-number
N/A
4. Enable the ACSEI client.
acsei-client enable
By default, the ACSEI client is
disabled.
Configuration example
Network requirements
As shown in Figure 64, an LB module is inserted in the 7500. Configure unified multisystem management
so you can manage the module in the Web interface of the switch.
Figure 64 Network diagram
Configuration procedure
1. Configure the 7500:
# Configure the unified management VLAN.
<7500> system-view
[7500] unified-management vlan 3000
# Enable ACSEI server.
[7500] acsei server enable
# Configure the local user to log in to the Web interface.
[7500] local-user admin
[7500-luser-admin] password simple admin
[7500-luser-admin] authorization-attribute level 3
[7500-luser-admin] service-type web
LB module
7500
XGE0/0
DeviceHost