F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

100
2. Configure the LB module:
# Configure the unified management VLAN.
<LB> system-view
[LB] unified-management vlan 3000
# Enable ACSEI client.
[LB] interface ten-gigabitethernet 0/0
[LB-Ten-GigabitEthernet0/0] acsei-client enable
[LB-Ten-GigabitEthernet0/0] quit
# Configure the local user to log in to the Web interface.
[LB] local-user admin
[LB-luser-admin] password simple admin
[LB-luser-admin] authorization-attribute level 3
[LB-luser-admin] service-type web
Verifying the configuration
1. Log in to the switch's Web interface by using the username and password admin.
Figure 65 Login page
2. Select Device Info from the navigation tree.
3. Click the Device Management tab.
4. Click the manage link for the LB module.
The Web interface of the LB module appears.
Figure 66 Unified multisystem management page