F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

142
Task Command Remarks
Display information about the
patch package.
display patch [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display patch information.
display patch information [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Software upgrade examples
Upgrading the entire system software from the CLI
Network requirement
The current system software version is soft-version1 for the LB module in Figure 90. The latest system
software image soft-version2.bin and the latest configuration file new-config.cfg are both saved in
cfa0:/aaa on the FTP server. The LB module and the FTP server can reach each other, and the PC and the
LB module can reach each other.
Upgrade the software version of the LB module to soft-version2 and configuration file to new-config.
Figure 90 Network diagram
Configuration procedure
1. Configure the FTP server (the configuration varies with server vendors):
# Set the access parameters for the FTP client (including enabling the FTP server function, setting
the FTP username to aaa and password to hello, and assign the FTP user the right to access the
cfa0:/aaa directory).
<FTP-Server> system-view
[FTP-Server] ftp server enable
[FTP-Server] local-user aaa
[FTP-Server-luser-aaa] password cipher hello
[FTP-Server-luser-aaa] service-type ftp
[FTP-Server-luser-aaa] authorization-attribute work-directory cfa0:/aaa
2. Configure the LB module:
# Log in to the FTP server.
FTP Client
FTP Server
User
Telnet
LB
1.1.1.1/24
2.2.2.2/24
Internet