F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

143
<LB> ftp 2.2.2.2
Trying 2.2.2.2 ...
Press CTRL+K to abort
Connected to 2.2.2.2.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(2.2.2.2:(none)):aaa
331 Give me your password, please
Password:
230 Logged in successfully
# Download new-config.cfg from the FTP server.
[ftp] ascii
[ftp] get new-config.cfg
# Download soft-version2.bin from the FTP server.
[ftp] binary
[ftp] get soft-version2.bin
[ftp] bye
<LB>
# Specify new-config.cfg as the next-startup configuration file.
<LB> startup saved-configuration new-config.cfg
Please wait...
... Done!
# Specify soft-version2.bin as the main startup system software image.
<LB> boot-loader file soft-version2.bin main
# Reboot the LB module to complete the upgrade.
<LB> reboot
3. Use the display version command to verify that the upgrade has succeeded. (Details not shown.)
Installing patches from the CLI
Network requirements
Download a patch file from a TFTP server to fix bugs on the LB module in Figure 91. The LB module and
the TFTP server can reach each other.
Figure 91 Network diagram
Configuration procedure
1. Configure the TFTP server:
# Enable the TFTP server function. (Details not shown.)
# Save the patch file patch_hfw.bin to the working directory on the TFTP server. (Details not
shown.)
2. Configure the LB: