F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

148
A file download dialog box appears.
6. Select to view the .xml file or to save the file to the local host.
Restoring the next-startup configuration file
Configuration restoration allows you to:
• Upload the .cfg file on the host of the administrator to the device for the next startup.
• Upload the .xml file on the host of the administrator to the device for the next startup, and delete the
previous .xml configuration file that was used for the next startup.
The restored configuration takes effect at the next startup of the device.
To restore a configuration file:
1. Select System > Maintenance from the navigation tree.
2. Click the Restore tab.
Figure 94 Restoring the configuration file
3. Click one of the Browse buttons to select the configuration file to be used:
{ Click the upper Browse button to select the .cfg file to be used.
{ Click the lower Browse button to select the .xml file to be used.
4. Click Apply.
Resetting the configuration
This operation disables the next-startup configuration file to serve for the next startup, restores the
device's factory defaults, and reboots the device.
To reset the next-startup configuration:
1. Select System > Maintenance from the navigation tree.
2. Click the Initialize tab.