F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

149
Figure 95 Resetting the configuration
3. Click Restore Factory-Default Settings.
Importing a configuration file
IMPORTANT:
Do not perform any other operations during the configuration import process.
This operation allows an administrator to import the .cfg file on the local host to the device and execute
the configuration in the file. The imported configuration takes effect immediately, but is not automatically
saved to the configuration file to be used at the next startup. To use the configuration for the next startup,
you must manually save the configuration.
To import a .cfg file:
1. Select System > Maintenance from the navigation tree.
2. Click the Import tab.
Figure 96 Importing the configuration
3. Click Browse.
4. Select the .cfg file to be imported as prompted.
5. Click Apply.
Managing configuration files at the CLI
Saving the running configuration
To make configuration changes take effect at the next startup, save the running configuration to the
startup configuration file to be used at the next startup before the device reboots.