F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

9
Figure 8 Setting the properties of the serial port
5. Power on the LB module and press Enter at the prompt.
Figure 9 CLI
6. At the default user view prompt <HP>, enter commands to configure the LB module or view the
running status of the LB module. To get help, enter ?.
Configuring console login control settings
The following authentication modes are available for controlling console logins:
• None—Requires no authentication. This mode is insecure.
• Password—Requires password authentication.
• Scheme—Uses the AAA module to provide local or remote console login authentication. You must
provide a username and password for accessing the CLI.
By default, console login does not require authentication. Any user can log in through the console port
without authentication and have user privilege level 3. To improve device security, configure the
password or scheme authentication mode immediately after you log in to the LB module for the first time.