F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

11
Figure 10 Accessing the CLI through the console port without authentication
Configuring password authentication for console login
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter console user interface
view.
user-interface console first-number
[ last-number ]
N/A
3. Enable password
authentication.
authentication-mode password
By default, you can log in to the LB
module through the console port
without authentication and have
user privilege level 3 after login.
4. Set a password.
set authentication password
[ hash ] { cipher | simple }
password
By default, no password is set.
5. Configure common settings
for console login.
See "Configuring common console
user interface settings (optional)."
Optional.
The next time you attempt to log in through the console port, you must provide the configured login
password, as shown in Figure 11.
Figure 11 Password authentication interface for console login