F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

13
Ste
p
Command Remarks
7. Apply an AAA
authentication scheme to
the intended domain.
a. Enter ISP domain view:
domain domain-name
b. Apply an AAA scheme to
the domain:
authentication default
{ hwtacacs-scheme
hwtacacs-scheme-name
[ local ] | local | none |
radius-scheme
radius-scheme-name
[ local ] }
c. Exit to system view:
quit
Optional.
By default, local authentication is
used.
For local authentication, configure
local user accounts.
For RADIUS or HWTACACS
authentication, configure the
RADIUS or HWTACACS scheme on
the LB module and configure
authentication settings (including the
username and password) on the
server.
For more information about AAA
configuration, see Security
Configuration Guide.
8. Create a local user and
enter local user view.
local-user user-name
By default, there is a local user
named admin.
9. Set an authentication
password for the local user.
password [ [ hash ] { cipher |
simple } password ]
By default, no password is set.
10. Specifies a command level
of the local user.
authorization-attribute level level
Optional.
By default, the command level is 0.
11. Specify terminal service for
the local user.
service-type terminal
By default, no service type is
specified.
12. Configure common settings
for console login.
See "Configuring common console
user interface settings (optional)."
Optional.
The next time you attempt to log in through the console port, you must provide the configured login
username and password, as shown in Figure 12.
Figure 12 Scheme
authentication interface for console login