F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

Logging in to the Web interface

The device provides Web-based configuration interfaces for visual device management and

maintenance.

Figure 20 Web-based network management operating environment

Web login guidelines and restrictions

• The PC where you configure the device is not necessarily the Web-based network management

terminal. A Web-based network management terminal is a PC (or another terminal) used to log in

to the Web interface and is required to be reachable to the device.

• If you click the verification code displayed on the Web login page, you can get a new verification

code.

• Up to five users can concurrently log in to the device through the Web interface.

• The Web-based configuration interface supports the operating systems of Windows XP, Windows

2000, Windows Server 2003 Enterprise Edition, Windows Server 2003 Standard Edition,

Windows Vista, Windows 7, Linux, and MAC OS.

• The Web-based configuration interface supports the browsers of Microsoft Internet Explorer 6.0

SP2 and higher, Mozilla Firefox 3.0 and higher, Google Chrome 2.0.174.0 and higher, and the

browser must support and be enabled with JavaScript.

• The Web-based configuration interface does not support the Back, Next, Refresh buttons provided

by the browser. Using these buttons may result in abnormal display of Web pages.

• The Windows firewall limits the number of TCP connections, so when you use IE to log in to the Web

interface, sometimes you may be unable to open the Web interface. To avoid this problem, HP

recommends you to turn off the Windows firewall before login.

• If the software version of the device changes, clear the cache data on the browser before logging

in to the device through the Web interface; otherwise, the Web page content may not be displayed

correctly.

• You can display at most 20000 entries that support content display by pages.

Logging in with the default settings

You can use the following default settings to log in to the Web interface through HTTP:

• Username—admin.

• Password—admin.

• IP address of the Ethernet port (GigabitEthernet 0/1 for the LB module)— 19 2 .16 8 . 0 .1.

To log in to the Web interface of the LB device from a PC by using the default settings:

IP network