F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

42
NMS login example
Network requirements
Configure the LB module and network management station so you can remotely manage the LB module
through SNMPv3.
Figure 29 Network diagram
Configuration procedure
1. Configure LB:
# Assign an IP address to the LB module. Make sure the LB module and the NMS can reach each
other. (Details not shown.)
# Enter system view.
<LB> system-view
# Enable the SNMP agent.
[LB] snmp-agent
# Configure an SNMP group.
[LB] snmp-agent group v3 managev3group
# Add a user to the SNMP group.
[LB] snmp-agent usm-user v3 managev3user managev3group
2. Configure the NMS:
Make sure the NMS has the same SNMP settings, including the username, as the LB module. If not,
the LB module cannot be discovered or managed by the NMS.
3. Use the network management station to discover, query, and configure the LB module. For more
information, see the NMS manual.