F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

51
Managing the device
Device management includes monitoring the operating status of devices and configuring their running
parameters.
The configuration tasks in this document are order independent. You can perform these tasks in any
order.
Configuring the device name
A device name identifies a device in a network and works as the user view prompt at the CLI. For
example, if the device name is Sysname, the user view prompt is <Sysname>.
Configuring the device name in the Web interface
1. Select System > Device Management > Device Basic Info from the navigation tree to enter the page
shown in Figure 32.
2. Enter the system name.
3. Click Apply.
Figure 32 Device basic information
The current system name is displayed on the very top of the navigation tree, as shown in Figure 33.
Figure 33 Current system name
Configuring the device name at the CLI
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the device name.
sysname sysname The default device name is HP.