F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

To set the idle timeout timer:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter user interface view.

user-interface { first-num1

[ last-num1 ] | { aux | console |

vty } first-num2 [ last-num2 ] }

N/A

3. Set the Web idle timeout

timer.

idle-timeout minutes [ seconds ] 10 minutes by default.

Enabling displaying the copyright statement

The device by default displays the copyright statement when a Telnet or SSH user logs in, or when a

console user quits user view. You can disable or enable the function as needed. The following is a sample

**************************************************************************

* Without the owner's prior written consent, *

* no decompiling or reverse-engineering shall be allowed. *

**************************************************************************

To enable displaying the copyright statement:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enable displaying the

Configuring banners

Banners are messages that the system displays during user login.

The system supports the following banners:

• Legal banner—Appears after the copyright or license statement. To continue login, the user must

enter Y or press Enter. To quit the process, the user must enter N. Y and N are case-insensitive.

• Message of the Day (MOTD) banner—Appears after the legal banner and before the login banner.

• Login banner—Appears only when password or scheme authentication has been configured.

• Incoming banner—Appears for Modem users.

• Shell banner—Appears for non-Modem users.

Banner message input modes

You can configure a banner in one of the following ways:

• Single-line input

Input the entire banner in the same line as the command. The start and end delimiters for the

banner must be the same but can be any visible character. The input text, including the command