F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

76
Figure 42 Adding a local user
3. Configure a local user, as described in Table 18.
4. Click Apply.
Table 18 Configuration items
Item Descri
p
tion
User Name
Enter the username of the local user.
The username can contain spaces in the middle. However, the device ignores
any leading spaces in the username.
User Privilege Level
Set the user privilege level of a user.
User privilege levels are visitor, monitor, configure, and management in
ascending order. A user with a higher level has all the operating rights of a user
with a lower level. For more information about user privilege levels, see "User
levels."
IMPORTANT:
The us
er privilege levels apply only to Web, FTP, Telnet, and SSH users.
Service Type
Set the service type that a user can use, including Web, FTP, SSH, Telnet, and
terminal.
You must configure a service type for each user for local authentication.
Otherwise, user authentication fails.
Password
Confirm Password
Set and confirm the password. The confirm password must be the same as the
previously set password.
Any leading spaces in the password are ignored.
Password Encryption
Select the method for encrypting passwords to be saved:
• Reversible—Uses a reversible encryption algorithm.
• Irreversible—Uses an irreversible encryption algorithm.