F3215-HP Load Balancing Module System Management Configuration Guide-6PW101

91
Figure 56 Network diagram
Configuration procedure
1. Create VD VD_A:
a. Select System > Device Management > Virtual Device > Configuration from the navigation
tree.
b. Click Add.
The page for adding a VD appears.
Figure 57 Creating VD_A
c. Enter the VD ID 2.
d. Enter the VD name VD_A.
e. Set the maximum number of sessions to 100000.
f. Set the maximum number of real service groups for load balancing to 100.
g. Set the maximum number of real services for load balancing to 200.
h. Set the maximum number of virtual services for load balancing to 100.
i. Click Apply.
2. Create VD VD_B:
a. Click Add.
The page for adding a VD appears.