F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

95
IP virtual fragment reassembly configuration
commands
display ip virtual-reassembly
Use display ip virtual-reassembly to display fragment information on an interface in the security zone,
including fragment interface type, actual number of fragment queues, maximum number of fragment
queues, maximum number of packets in each fragment queue, and fragment queue aging time.
Syntax
display ip virtual-reassembly vd vd-name [ zone zone-name ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vd vd-name: Specifies the name of VD, a case-insensitive string of 1 to 20 characters. This argument does
not support the following special characters: question mark (?), left angle bracket (<), right angle bracket
(>), back slash (\), quotation marks ("), percent sign (%), apostrophe ('), ampersand sign (&) and pound
sign (#).
zone zone-name: Specifies the name of a security zone, a case-insensitive string of 1 to 20 characters.
This argument does not support the following special characters: question mark (?), left angle bracket (<),
right angle bracket (>), back slash (\), quotation marks ("), percent sign (%), apostrophe ('), ampersand
sign (&) and pound sign (#).
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, this command display fragment information on all interfaces in the security
zone.
Examples
# Enable IP virtual fragment assemble for security zone Trust.
<Sysname> system-view
[Sysname] zone name trust
[Sysname-zone-trust] import interface gigabitethernet 0/1