F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

111
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the portal configuration for interface GigabitEthernet 0/1.
<Sysname> display portal interface gigabitethernet 0/1
Portal configuration of GigabitEthernet 0/1
IPv4:
Status: Portal running
Portal server: servername
Authentication type: Layer3
Authentication domain: my-domain
Authentication network:
Source IP: 1.1.1.1 Mask : 255.255.0.0
Table 30 Command output
Field Descri
p
tion
Portal configuration of interface Portal configuration on the interface.
IPv4 IPv4 portal configuration.
Status
Status of the portal authentication on the interface:
• Portal disabled—Portal authentication is disabled.
• Portal enabled—Portal authentication is enabled but is not functioning.
• Portal running—Portal authentication is functioning.
Portal server Portal server referenced by the interface.
Authentication type Authentication mode enabled on the interface.
Authentication domain Mandatory authentication domain of the interface.
Authentication network
Information of the portal authentication source subnet and destination
subnet.
Source IP IP address of the portal authentication source subnet.
Mask Subnet mask of the IP address of the portal authentication subnet.
display portal local-server
Use display portal local-server to display configuration information about the local portal server,
including the supported protocol type, the referenced SSL server policy.
Syntax
display portal local-server [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level